The Blackmagic URSA Mini 4.6K is a truly affordable cinema camera with impressive specs that houses Blackmagic’s newest sensor. When it was announced last year, Blackmagic Design once again won many filmmakers over. Now that the camera has started shipping, there are many positive, but also some negative voices. Let’s take a look at the guts of the 4K vs 4.6K Blackmagic URSA Mini cinema camera in our lab. Comparison: Blackmagic URSA Mini 4K vs 4.6K On the outside these two cameras look identical. Inside the body they probably also share most of the same innards. What really differentiates one from the other is mostly the sensor as far as we can tell. The 4K sensor on the Blackmagic URSA Mini 4K is the same that was used on the large URSA camera and on the Blackmagic Production Camera. The new 4.6K sensor is 15% larger and similar in size to the ARRI Alexa and Canon C300 mark II sensors. We will focus on testing several aspects of sensor performance and evaluate the image quality. To make this review fair, we will also throw the popular Sony FS7 into the mix as an additional reference camera. A look at the Specs Specs-wise these cameras are virtually identical. Both shoot up to 60fps in 4K. The main difference lies in their maximum resolution and sensor size. The fact that these cameras shoot in all flavours of the Apple ProRes codec, as well cinemaDNG RAW is their big plus. It is, in fact, an aspect where all Blackmagic cameras have an advantage over most other low-cost cinema cameras on the market. Blackmagic URSA Mini 4K Max Resolution: 4K (4000 x 2160) Max Framerate 4K: 60fps Max Framerate HD: 60fps Log Gamma: Film Log Sensor: Aps-C (21.12 x 11.88 mm) Mount: Canon EF or PL Codec Bitrate 4K: up to ProRes 444 XQ – 312.5 MB/s Price: About $3000 Blackmagic URSA Mini 4.6K Max Resolution: 4.6K (4608 x 2592) Max Framerate 4K: 60fps Max Framerate HD: 120fps (windowed) Log Gamma: Film Log Sensor: Super35 (25.34 x 14.25 mm) Mount: Canon EF or PL Codec Bitrate 4K: up to ProRes 444 XQ – 312.5 MB/s Price: About $5000 Dynamic Range A good dynamic range rating allows us to capture a larger range of shadows and highlights in high-contrast scenes, an important property when it comes to comparing the URSA Mini 4K vs 4.6K and one where a main difference will become apparent. We’re testing with a DSC labs XYLA-21 transmissive test chart. For our dynamic range tests we use the Zeiss 50mm Cp2 macro lens (more on how we test HERE). Our software measured about 12 stops of usable dynamic range on the Blackmagic URSA Mini 4.6K (RAW). This is very similar to the rating of the a7S II and C300 mark II. [Update:] How we tested: We measured dynamic range using uncompressed RAW with an ISO of both 800 and 1600. We decoded the files in DaVinci Resolve 12.5 with BMD Film 4.6K Gamma applied. We also tested dynamic range with Apple ProRes 422 HQ and had the same results. Here’s a screenshot of the dynamic range of a few popular cameras compared. In comparison to the URSA Mini 4.6K, our software measured about 8.5 stops of usable dynamic range on the Blackmagic URSA Mini 4K (RAW). The Sony FS7 reaches 12.5 stops. For each camera there are different reasons why the dynamic range is limited. The Sony FS7 image seems to become unstable in the lower stops due to processing. There is noise reduction which cancels out noise, but it’s also apparent that we quickly loose detail in the darker areas. The URSA Mini 4K simply doesn’t capture as much dynamic range as the other cameras. The URSA Mini 4.6K would have potential for more stops of range, but noise becomes stronger in the dark areas. Unfortunately there is a lot of pattern noise there, more than on the 4K, which makes darker areas of the image less usable. Here is a shot of the darker steps (11, 12, 13 and 14). Step 13 and 14 were not counted as valid range by our software, because there is too much noise. See the same image with raised gamma for better viewing below. Blackmagic URSA Mini 4.6K – Pattern Noise in Dynamic Range Step 11, 12, 13 and 14. Blackmagic URSA Mini 4.6K – Pattern Noise with raised Gamma ISO? The Blackmagic URSA Mini cameras are not strong when it comes to low light performance. In comparison, the FS7 has a greater range in terms of ISO. On the URSA Mini 4K there are only three settings: 200, 400, and 800. The URSA Mini 4.6K goes up to ISO 1600. In our tests we found that there is little difference in image quality when comparing all of the ISO speeds available on a single camera. It might seem so at first because the image gets brighter with higher ISOs, but in reality the lower ISO speeds merely cut off the image video range. In other words, the same image only gets coded differently at different ISO speeds, seemingly without any difference in processing whatsoever. That’s why we recommend to use the full video range in ProRes, in order to get the best color gradations. This can be achieved by using ISO 400 or 800 on the URSA Mini 4K and ISO 800 or 1600 on the URSA Mini 4.6K. When exposing your image, though, make sure that you do not underexpose the image, as it will look brighter with the higher ISO setting (800 on 4K and 1600 on 4.6K). If you want the best quality, overexpose your image so you don’t get the noise from the darker areas into your shot, but be careful about highlight clipping. The lower ISO speeds (200 and 400 on the 4.6K) should be avoided. [Update:] In order to get the most range out of our footage, Blackmagic recommends rating the cameras at their native ISO, which is 400 on the 4K, and 800 on the 4.6K, and then processing the RAW files using the latest version of DaVinci Resolve with BMD Film 4K and BMD Film 4.6K Gamma applied to the RAW decode. In RAW mode, ISO can be selected during the decoding process. We found that a setting of ISO 800 gives you the best starting point to grade. Image Quality In terms of image quality, the Blackmagic URSA Mini 4K and 4.6K are highly regarded due to their codecs. The following images were taken from URSA Mini RAW files, the Sony FS7 with its native codec and the Fuji XT-2 mirrorless camera with an external recorder: 100% crops (except the 4.6K downscaled to 4K) What we can clearly see here is that the Sony FS7 and Fujifilm X-T2 have a cleaner image when it comes to fine details. The URSA Mini 4.6K and 4K, on the other hand, show a little bit of a moire pattern on fine lines due to aliasing. The resolution of the Sony FS7 UHD image seems similar to that of the URSA 4.6K RAW image downscaled to 4K in terms of how much detail they resolve. When we compare the Blackmagic URSA Mini 4K vs 4.6K we see that the URSA Mini 4.6K resolves more detail than the 4K. The same is true when we compare a recording in 4K resolution on the URSA Mini 4.6K, to a 4.6K image on the same camera. But image quality is not a thing that is black and white. Here you can see how the different cameras treat a natural object, as opposed to test chart stars: Contrast on all images above has been adjustedfor a rough match. Interestingly the image coming from the Sony FS7 seem much softer. Add some sharpening to the FS7 image, though, and you will find that the image gets much closer to the way the URSA Mini images look. In conclusion, I would say that the codec of the FS7 is its weakest point, but the image looks cleaner than the one from the URSA Mini 4K and 4.6K. All in all, the URSA Mini 4K and 4.6K have a similar looking image, though the 4K wanders off into a slight green tint while the 4.6K looks more magenta. There is a certain amount of noise in the shadow areas on both cameras, and the image is slightly sharpened in-camera. But the look is very natural and colours are quite neutral. [UPDATE:] Here is a version of only the Sony FS7 image, graded and sharpened to match the URSA Mini processed RAW images above. Here you can see that the detail is very similar, but also how the codec easily falls apart on some portions of the image. The image is more stable and ready to grade on the URSA Mini’s: Sony FS7 image graded and post sharpened to match the URSA Mini 4.6K Rolling Shutter Some cameras, like the Sony a7S II, suffer from a severe rolling shutter effect, a phenomenon also referred to as “jello”. Unfortunately, the rolling shutter that we see on most CMOS sensor cameras is also present on the Blackmagic URSA Mini 4.6K and Sony FS7. As we can see, the rolling shutter on the Blackmagic URSA Mini 4.6K is identical to the one we found on the Sony FS7. 11ms is an OK rating when it comes to rolling shutter. On most mirrorless cameras the effect is more severe. The Blackmagic URSA Mini 4K however gets the best rating, as it has a global shutter sensor that does not suffer from the rolling shutter effect at all. RAW vs ProRes When comparing the codecs on the Blackmagic URSA Mini 4K vs 4.6K we found that ProRes generally gives us exceptional results. RAW is a very nice option and should in theory extends bit depth of your files to give you finer gradations. We did not test this. Dynamic range is not increased when using RAW, however. [Update:] We have compared gradations on a RAW and ProRes file and we can confirm that RAW increases the bit depth. So if you want the best filmic look for heavy color grading, we recommend to use the RAW option on this camera. Conclusion It was truly interesting to take a closer look at the Blackmagic URSA Mini 4.6K in comparison to the URSA Mini 4K camera. We saw that the dynamic range of the URSA Mini 4.6K is similar to the FS7. It is a vast improvement over the URSA Mini 4K, which really lacked behind on this point. On the other hand, the URSA Mini 4K has a global shutter sensor and thus doesn’t suffer from rolling shutter effect at all. In terms of image quality, the URSA Mini 4.6K delivers a really nice image with balanced colors and a natural look. The URSA Mini 4K clearly comes from the same family of sensors, but has a slight green tint. There is slight aliasing on both the 4K and 4.6K when we compare it to the FS7, though, and noise kicks in quickly if you are not careful. Both cameras are no lowlight wonders, but there is an improvement on the 4.6K. [UPDATE:] Also, the 4.6K can shoot up to 120fps in windowed HD. The most striking argument for the Blackmagic URSA Mini 4.6K is clearly its dynamic range. It also has a sensor 20% larger in size and an extra of 0.6K in resolution, which most will deem marginal in a world of 4K, UHD or HD delivery. If dynamic range is important to you, then the URSA Mini 4K probably does not have what you want. But besides this point, both these cameras are very similar. In our opinion, for those shooting in studios, there is no good reason to upgrade to the 4.6K at this time. Everyone else will probably welcome the extra filmic quality the URSA Mini 4.6K can achieve. Would I consider shooting on the Blackmagic URSA Mini 4.6K? Absolutely yes. With its high bit depth and natural looking image it will deliver high quality 4K with a high codec quality. There are other good and comparable cameras, but when it comes to film aesthetics and if you put quality control issues aside, then there is not much that will take you this far at the low pricepoint of the 4.6K. What is your experience with the Blackmagic URSA Mini 4K vs 4.6K? Let us know your opinion in the comments.Read more
Blackmagic Design announced several small updates at IBC. The B4 mount URSA Mini is one update that could be quite significant. Check out our elaborate talk with Simon Westland. Blackmagic Design URSA Mini with their new B4 Mount Adapter and an ENG Lens The B4 Mount is a standard used in broadcast to support ENG lenses on ENG cameras. What is interesting about Blackmagic’s approach with the B4 Mount URSA Mini, is that they built a $295 “adapter” that fits on the Blackmagic URSA Mini PL and powers the lens and connects the electronics via a cable. You might say: “Oh well, it’s just an adapter”, but hold that thought, there is actually more to it. This “adapter” actually replaces the PL mount as in that you will have to screw it into the camera body. Furthermore your ENG lens will vignette on that super35mm sensor, so they built a lens element into the adapter that will blow up the image to match the camera’s sensor. It seems like this will only work in HD crop mode though. The benefit here clearly is that you can get an ENG lens that is unmatched in terms of ergonomics by anything available in the normal “large sensor” lens market. You have a lens that retains the focus throughout the range, has a built in handle and smooth zoom motor, very convenient for action handheld style shooting or broadcast work. A 4.6K large sensor image with B4 lens ergonomics? Blackmagic Design Ursa Mini B4 Mount Adapter Well there are some possible pitfalls here. [UPDATE]: It seems as though the B4 adapter will only work with the camera’s HD windowed mode. It is unclear in the press release that only states “The Blackmagic URSA Mini B4 Mount is designed to replace the existing PL lens mount on Blackmagic URSA Mini PL, turning it into a B4 camera for HD.” Our writer Richard Lackey has hands-on experience with this kind of lenses and raises another good point to think about when it comes to B4 lens quality and the idea to use them in a 4K environment: “One main consideration in this setup is that most B4 lenses are not designed for and wouldn’t be sharp enough for adequate 4K performance, especially the older ones that many people may buy used. So using HD B4 lenses really only makes sense for HD output, any limit in resolving power of these lenses would be further compounded with the optical enlarger in the adaptor, so the optics in any case would never be capable of producing a good 4K image.” In their press release Blackmagic Design addresses the quality point saying “The B4 mount also features spherical aberration correction so customers can use their lenses wide open with no blooming effect.” Another point to mention is that when you optically blow up an image designed for a 2/3 inch sensor you will use light, meaning the lens will becomes slower (less light sensitive). It remains to be seen how the B4 Mount URSA Mini will fare in a real life shooting environment. We will certainly keep our eyes on this one and test it as soon as we can. A deal breaker that I should mention is of course that these lenses are very expensive, priced north of anything the camera body and accessories will cost. For people, especially broadcasters who already own B4 lenses the B4 Mount URSA Mini could be a significant announcement. The Blackmagic URSA Mini 4K is starting to be delivered, while we’re still waiting for the release of the URSA Mini 4.6K that is scheduled for the end of October (LINK)Read more
We only send updates about our most relevant articles. No spam, guaranteed! And if you don't like our newsletter, you can unsubscribe with a single click. Read our full opt-out policy here.