by Tim Fok | 9th February 2017
The Libec HFMP is now available for pre-order. For those who missed it the first time round, the Libec Hands Free Monopod is an inventive, quick-operating system that enables you to switch between monopod and static tripod mode with a single stomp. I’ve been a firm believer of the footed monopod in the past; it can be a fantastic tool for quickly and efficiently getting coverage with compact camera systems. If you were clever with the Manfrotto system, you could poise your monopod so that it stood up on it’s own, albeit it was always hairy as it could tip at any time. The Libec HFMP is designed for even the un-clever filmmaker, as its idiot-proof foot click base enables you to switch between fluid monopod and self stand mode in seconds. This will be a fantastic feature for those looking for a stable system that’s fast to operate, especially Wedding and Event filmmakers that need to cover a lot of ground with a small footprint setup. We caught up with Libec at IBC last year to talk about the HFMP: The Full Libec HFMP setup ships with the TH-X Pan-and-Tilt Video Head. This is a compact video head with top-snapping plate, which is a must for the modern day filmmaker – no ones likes a slide! Libec HFMP – Useful Specifications: Payload 4kg / 9.0lb Tilt angle +90 / -80 Dual Pan Function Design Pan function on head Weight 2.7kg / 5.9lb Height 87.5 to 189.5cm / 34.4 to 74.6″ Leg Lock Type Flip Locks Pipe Diameters (upper/mid/low) 34.0mm/29.5mm/25.0mm Monopod Case Included Video Head Spec: Payload 4kg / 9.0lb C.G. 55mm Counterbalance FIX Drag Mode FIX Tilt angle +90 / -80 Plate attachment 1/4″ Screw with video pin Weight 1.1kg / 2.3lb Ball diameter 65mm/flat base with 3/8 screw hole There are quite a few of these three-legged monopods out there now, but there’s no doubt that the one-click action of the locking base will be a huge selling point of the Libec HFMP. For me, the head is another feature to consider. The filmmaker this monopod will attract will be the resourceful one – very compact gear, moves very quickly and wants seamless integration between all their kit. The TH-X Pan-and-Tilt Video Head is actually quite a clever design that suits its target audience more than some may think, as it is a complete system and will bolt straight onto any set of 50mm ball legs (even 75mm at a squeeze). Libec has integrated a low profile 65mm half bowl on the bottom of the head as well as being a flat base one, and it ships with a bowl clamp and has pan and tilt locks. This all means you can take it off your monopod and stick it straight onto a pair of tripod legs. The Manfrotto system was always a pain here. The head that ships with the monopod didn’t have a pan lock, and you’d have to add a half bowl adaptor to get it on your bowl legs; I like the complete system Libec has gone for. Having said that, if you have a tripod head system you are familiar with (or have heavy tripod plate investment in) then you can also buy the Libec HFMP without the video head. I’ve included both pre-order links below for you to check out, shipping should start within February.Read more
by Nino Leitner | 11th February 2015
Edelkrone just announced the FlexTilt Head, an extremely versatile kind of flexible baseplate that can be turned in multiple directions and folds up into next to nothing. They call it a “tripod head”, but that’s not to be confused with a fluid head which is made for video shooters – it’s more like a head for photographers, nevertheless more versatile than most other solutions in that market. It’s made of machined aluminum like most oder Edelkrone products and takes camera setups of up to 2.5 kg (5.5 pounds) – so it’s clearly made for DSLR cameras only. After some of there very innovative other products (like the SliderPlus, an extending slider), Edelkrone surprises once again with a product based on a great idea that is unlike most of the things I’ve seen on the market before. Quite a bargain at $100 – however it cannot (and isn’t meant to) replace a proper fluid head for video. But using it on a slider or for versatility for doing static shots (e.g. Timelapses), I can clearly see how this can end up in many video shooters’ tool bags. Flex-Tilt Head Tech Specs Folded Size: 3.3 x 3.7 x 1.06 inches (85 x 95 x 27mm) Weight: 0.405 kg Carrying Capacity: up to 5.5 pounds (2.5 kg) Mount: 1/4 compatible cameras are mountable on top, 3/8 mounting hole belowRead more
by Sebastian Wöber | 5th October 2012
We thank our sponsor B&H who has made cinema5D’s news coverage of IBC 2012 possible. Get your gear through B&H to support this platform: www.bhphotovideo.com The famous most affordable Sachtler tripod gets a bigger brother. What is this, a second Sachtler Ace? Indeed, this is an upgrade version for those who like the affordability of the first Sachtler Ace, but require some more features. Basically the advantages of the Ace L over the normal Ace (Ace M) are the following:Read more
We only send updates about our most relevant articles. No spam, guaranteed! And if you don't like our newsletter, you can unsubscribe with a single click. Read our full opt-out policy here.