Here’s a nice little grip system that can save you time on set. The Ninja Dolly is versatile & compact, made in the U.S and benefits from the use of standard domestic tubing for the track. Primarily a dolly but also much more, place it on the ground for a high hat or rig it to a car with its four industry standard baby pin receivers. Introducing the Ninja Dolly I’m not sure what I see most of nowadays, Sony and their affordable 4K cameras or working DPs who have ventured into making an all-in-one grip product. The Ninja Dolly system (to the dismay of all Sony fanboys) falls into the latter category but shakes things up a little with its quick and easy switch between various guises. As a tracking dolly, the Ninja Dolly is a compact and universal system; a neat flat base, strong & thin with easy lift handles and a compact 75/100mm bowl adaptor in the middle for tripod heads. V-shaped wheels with flat tops ensure a wide variety of compatible track poles, as well as the option to track along a flat floor without any track. The Ninja Dolly ships with no track, just pop down your local hardware store and grab some standard scaff tubing in the 1 5/8″ region. The feet are the end blocks to your tracking system. These are adjustable in width according to your setup and payload and can either sit on the floor or attach to conventional grip heads via 1 or 2 baby receivers. 4 of the same industry standard baby receivers can be found on Ninja Dolly flat base. These protrude further than the wheels themselves meaning you can seamlessly switch between dolly and high hat configuration; they operate as the protection to the wheels when you place the Ninja Dolly on a flat surface too. However, their use doesn’t stop there; you can use the Ninja Dolly as a platform for car mounting. Or stick some suction cups on the receivers for more tricky configurations. Owner and creator, Brent Buntyn, takes pride in the 2-year journey it’s taken to get to this point—not only in production but also testing and refining the Ninja Dolly in-the-field as a working DP. I think this shows; it’s a simple system that catches my eyes due to its ability to switch seamlessly through configurations. Package price for the Ninja Dolly with 2 Feet Rail Brackets (no rails) is $799+shipping.Read more
Rig Wheels has announced a new car mount product that we’ll see more of at NAB next month. The Cloud Mount is a customizable camera vibration isolation system that is designed to cut car rig setups down to just minutes. Conventional car mount rigging can take hours. Unconventional measures can be dangerous. Rig Wheels looks to bring convenience to those quick few car shots, without the constraints of working with a slow & heavy rig—or the confines & safety issues of hanging out of a car window/trunk. Car Mount Rigging Made Easy The Rig Wheels Cloud Mount is simply a scalable magnetic platform, adjustable wire cage, and top plate; it works in conjunction with existing gimbal stabilizers like the DJI Ronin and Freefly Movi. The magnetics are powerful (payloads below) and coated with rubber to reduce the chance of damaging your car’s paint or body work. The flexible wire cage is the core, taking the strain of movement, alleviating this from your gimbal—and, naturally, your camera motion. Both the thickness and length of the wires can be adjusted according to the requirements of your rig. The Rig Wheels Cloud Mount will be available in 3 sizes: 8-Magnet DSLR Package (suitable up to 400lbs pulling force) 12-Magnet Mid-size Package (suitable up to 600lbs pulling force) 16-Magnet Pro-Package (suitable up to 800lbs pulling force) There are a few options for mounting on the vehicle. The Cloud Mount in its entirety comes with the magnetic platform, but it’s also available without this section. You could also bolt on a few receiving spigots if you want to utilize the shock mounting aspect on more conventional setups. Further more is the options for suction cups for mounting on none magnetic surfaces such as glass. In terms of mounting your gimbal, it’s relatively straightforward for the DJI Ronin. As standard the Ronin, the gimbal detaches from the handlebars via a proprietary dovetail join. Rig Wheels offer an adapter plate compatible with this. For the Freefly MøVi, you’ll need the Freefly Ninja Star Adaptor Plate and Toad in the Hole quick release system. It looks as if Rig Wheels will provide this option in the future, but you’ll need to upgrade your MøVi to the rapid release Toad In the Hole system before hand, as they do not ship with this as standard. Alongside the promo video is a useful long, and uncut video showing the Rig Wheels Cloud Mount in a more off-road environment Sure, it’s not perfect, and it certainly won’t entirely replace complex rig configurations where much more precision and control comes into play. For these shoots, the big, slow car mount rig configurations are more of an occupational hazard than a dilemma, but Cloud Mount looks to offer a fantastic solution to those looking for a very quick and straightforward setup, which will offer more than hanging arms length from a moving vehicle. Like many Rig Wheels products, The Cloud Mount is not a closed off bit of kit. If you own the Rig Mount X or XL, you already having existing components and can just buy add-ons. Or you can even configure it to work with their RigSkate and RailDolly. As a guide of price, the DSLR package with 8-magnet base starts from $999 and the Pro-Package with 16-magnet base starts at $1199. We’ll keep an eye out for Rig Wheels at NAB next month.Read more
The Half Inch Rails carmount kit is a 3-point mounting kit for car interior or exterior shots made for small cameras like dslr’s. The advantage of this kit is it’s lightness and sturdyness and the fact that you can get a mounting point some inches away from the surface with the hir rods. We don’t know how sturdy this rig really isRead more
We only send updates about our most relevant articles. No spam, guaranteed! And if you don't like our newsletter, you can unsubscribe with a single click. Read our full opt-out policy here.