The DJI Inspire 1 is an incredible drone. In my tests and comparison of the X3, X5 and X5R cameras on the DJI Inspire 1 Pro I found that especially the Zenmuse X5R RAW camera delivers amazing images in 4K. But what about X5 ND filtration? On sunny days just closing the iris is not enough. So which is the best ND Filter for the DJI Zenmuse X5 and Zenmuse X5R cameras used on the DJI Inspire drone and DJI Osmo handheld gimbal? The Best DJI X5 ND Filter I found 5 6 different ND filters I could test both with the DJI Inspire 1 RAW and with the DJI Osmo RAW and compared them to each other that is both compatible withe the Zenmuse X5 and the Zenmuse X5R camera. First I compared the filters in the field under varying light conditions, then I did another comparison in our test lab. Check out the video to see the results. Here’s an overview of the different filters I tested and their properties explained. In the conclusion I will summarize my findings and recommendations. Polraoid VariND Weight: 15g ND filtration: 1-8 stops Weight balancing: filter, extension ring and 49mm fotasy lens hood (EU: Link) The Polaroid VariND is the most affordable of all the filters. It performed well, just had a slight orange tint. There are no hard stops, so it is not as convenient to use as the B+W. In order to be ok with gimbal weight you should use an extension ring and 49mm lens hood. The original DJI lens hood can not be used when this filter is on. The filter has no IR cut. US: BUY HERE EU: BUY HERE B+W XS-Pro MRC VariND Weight: 26g ND filtration: 1-5 stops Weight balancing: filter and 49mm fotasy lens hood (EU: Link) The B+W XS-Pro MRC VariND is a lot more expensive than the Polaroid, but build quality is excellent, it has hard stops and it looks quite neutral with a slight orange shift similar to the Polaroid. In order to be ok with gimbal weight you should use 49mm lens hood. The original DJI lens hood can not be used when this filter is on. The filter has no IR cut. US: BUY HERE EU: BUY HERE Heliopan VariND Weight: 49g ND filtration: 1-6 stops Weight balancing: Too heavy. Filter is not recommeneded. The Heliopan VariND feels like a solid product. It has hard stops and accurate markings and the image looks very neutral. Only at the far end I noticed an ND cross, so the ND filtration was not even. Unfortunately this filter is too heavy as an X5 ND or X5R ND. The filter has no IR cut. BUY HERE Tiffen XLE Series Intermediate 3.0 IRND Weight: 13g ND filtration: 10 stops Weight balancing: filter, DJI weight ring, and 46mm fotasy lens hood The Tiffen XLE Intermediate IRND filters 10 stops of light and has an IR cut built in. This was too much even for a sunny day and the IR cut turned my image green to counter magenta shift. The result was not neutral, so this option is not for me. BUY HERE Tiffen XLE Series Premiere IRND 3.0 Hot Mirror Weight: 13g ND filtration: 10 stops Also available in: Weight balancing: filter, DJI weight ring, and 46mm fotasy lens hood Just like the intermediate, this Tiffen XLE Hot Mirror IRND filters 10 stops of light. Too much exposure reduction for my tastes and the IR cut turned my image green. I was not happy with the result. If you need a good IR cut filter this Hot Mirror seems better suited than the intermediate option though. BUY HERE Formatt Hitech Firecrest IRND 1.5 Weight: 8g ND filtration: 5 stops Also available in: 1 stop, 2 stops, 3 stops, 4 stops, 6 stops, 7 stops, 8 stops, 9 stops, 10 stops Weight balancing: filter, DJI weight ring, and 46mm fotasy lens hood Just like the two Tiffen filters, this Formatt Hitech Firecrest filter has no variable ND functionality. It filters 5 stops of light and according to the manufacturer there is also an Infrared filtration built in. The image was very neutral and had a slight blue shift that I liked. It is the lightest of all the filters tested and not too expensive. US: BUY HERE EU: BUY HERE Conclusion For me the Formatt Hitech Firecrest IRND 1.5 was the ideal filter for sunny shoots. The neutral image looks clean, it is light and affordable and even has some IR reduction, though I did not seem to need that when testing the other filters. As a VariND the B+W seemed like the best option. Especially for the DJI Osmo as an X5 ND it would be ideal with hard stops and a clean image. As a budget option the Polraoid would also do the job, but another adapter ring is needed to balance it properly. I hope this review was helpful for you. If it was please consider buying your gear through our recommended retailer’s links. And if you worked with any of the filters or other X5 ND filters please let me know about your experience in the comments.Read more
Every large sensor & HDSLR shooter needs an ND filter for outdoor shoots and Variable ND’s have proven mighty useful if you’re a one-man band or on the clock. But it is also a known fact that some Vari ND’s dampen your shots quality to some extent. So which is the best Variable ND for the money? Tim Fok put together a very useful test in which he compared the most common brands in detail. This is a guest post written by Tim Fok So I’m on the look out for a new variable ND filter. I’ve used the LCW mark II for a couple of years now, and have never been particularly keen on the softness it’s always seemed to add. But whilst trying to complete my L series lens collection, the hunt for a new ND filter kind of took a back seat, until now.Read more
We only send updates about our most relevant articles. No spam, guaranteed! And if you don't like our newsletter, you can unsubscribe with a single click. Read our full opt-out policy here.