Being able to power your devices on set is crucial. For this reason, SmallHD’s recent update for its 500 & 700 series monitors is a really nice addition. There are now 5 different options to power the monitors externally, one for pretty much every scenario out there. 500 & 700 Series – Power Options The ‘bigger’ brothers in the lineup of SmallHD monitors, such as the AC7 or the DP7, had different power options right from the beginning. The 500 & 700 series of on-board monitors only offered support for Canon LP-E6 style batteries, as well as Sony L batteries for the 700 series. But this drawback is about to cease as the US-based company has just announced a variety of new power options for these monitors. One by one, the following power options are now available: DCA5 Kit ($139.99). The kit includes an LP-E6 dummy battery, as well as a 36-inch D-Tap cable for connecting the monitor to a D-Tap power source. The battery end of the cable is equipped with a standard barrel-type connector. DCA5 Kit – for powering via D-Tap DCA5 LEMO to D-Tap Kit ($279.99). With this you’ll be able to power up your monitor via a LEMO connection on one end of the cable and the common D-Tap connector on the other end. This kit is more on the pricey side of things, but if you’re handling a lot of LEMO powered devices, this should come as no surprise. DCA5 LEMO to D-Tap Kit Gold Mount Battery Bracket Kit ($249.99). If you want to attach a full-size Anton Bauer battery to the back of your 700 series monitor, you’ll need this kit. Again, an LP-E6-style dummy battery is provided in order to connect the Anton Bauer to the monitor itself. This setup might be of good use if you want to build a compact director’s monitor. Unfortunately, it’s not available for the 500 series. Gold Mount Battery Bracket Kit V-Mount Battery Bracket Kit. Do you prefer V-mounts as a power source instead? This kit provides everything you need. It’s almost the same as the gold mount version, so again, you’ll get a LP-E6-style dummy with it. DCA5 Barrel to AC Power Kit ($139.99). Actually, this one shouldn’t even be an additional accessory. Unfortunately, the 500 & 700 series monitor lack a proper AC input, but you can purchase this kit to get over that limitation and get constant power. DCA5 Barrel to AC Power Kit So, in addition to the already existing power option, the good old Canon LP-E6 style battery, these kits allow you to power up your 500 & 700 series SmallHD monitors with almost every power source you’ll find on set. The 700 series can also be powered with Sony L batteries, which adds up to 7 different power options for that model. That’s pretty amazing, considering that it’s always nice to have choices. But there is always a downside, right? This time, it’s the pricetag. $139.99 for an AC adapter that should be there in the first place? I don’t know… What do you think of this new variety of power options? source: SmallHD websiteRead more
SmallHD firmware update 2.2 is available for all 500 and 700 series monitors. The update includes a fully customizable vectorscope, on-screen battery display, dual zebras and most significantly pre-loaded Rec 709 LUTs for a host of log camera profiles. As a user of the SmallHD 502, I am really looking forward to the use of a pre-loaded log to Rec 709 LUTs. Support will include Sony S-log, Canon C-log, Arri Log C, and GoPro Protune—to name just a few. Of course, not all cameras support LUTs in-camera and those that do sometimes have a funny way of grouping certain outputs in regards to menu overlays and the internal recording (ahem… FS7… ahem). Therefore, it is good to have options at your disposal when recording one profile, sending another to your client, and viewing another yourself. Vectorscope is a welcome addition also, like all exposure aids it will be fully customizable in size, location, and opacity. Full list of features for SmallHD firmware update 2.2 for 500/700 series monitors: 1. Full Support for 700 Lite Series Monitors Added 2. A library of Reverse LOG LUTs has been added to the monitor. These are accessible using the LOOK Tool on any page 3. Default Calibration LUTs have been added to the 702, 702 Lite and 701 Lite 4. On-screen “Status Display” may now be enabled in the settings menu This feature displays: – Input Type – Input Format – Time – Battery Status- Voltage and Percent remaining for compatible LP-E6 Canon Batteries 5. LUTs now have an “intensity” slider – When modified on the Output Page the intensity of the LUT is altered downstream as well 6. Vectorscope has been added – Vectorscope displays data modified by LUTs loaded on pages 7. Settings menu option to automatically perform an image-capture when SDI Record signal occurs 8. Low Battery indicator now appears on top of video when a chipped Canon battery reports <15% remaining 9. Backdrop at boot time, background in collage, and background on individual pages changed from black to dark gray Improvements and Bug fixes: 1. Improvements to the “Calibration” settings page. – “Brightness, Contrast” renamed to “Black Point, White Point” 2. “No Signal” text now includes source signal -> “No HDMI Signal” | “No SDI Signal” 3. Up to 2 zebra tools may be enabled simultaneously 4. Waveform Improvements: – User-selectable intensity – User-selectable Color when in “LUMA” mode 5. Improved LUT support: – LUTs with negative values should now load – LUTs with values that range from 0.0-1.0, but also include illegal values above 1.0 should also now load 6. Fixed a bug that kept some joysticks from working when upside down SmallHD firmware update 2.2 can be downloaded here, where you’ll also find instructions on installation.Read more
Zacuto has announced a firmware update to its Gratical EVF. Firmware version 2.02.00 focus’ mainly on bug fixes but also add compatibility to the Paralinx Triton wireless system. Here’s a list of the new features and fixes in firmware 2.02.00 for the Zacuto Gratical: Fixed a bug that caused the image to freeze when pixel to pixel zoom was activated. Fixed a bug that was not allowing multiple LUTs set to function buttons. Added compatibility for Paralinx Triton wireless transmitter. Updated HDMI receiver compatibility. Improved audio meter responsiveness for HDMI. Improved algorithm for OLED brightness auto adjustments. We’ve talked about the Gratical many times on here, including an extensive review. It’s a fantastic little EVF provide a crisp full HD image via the OLED screen. Whilst initially expensive the Gratical X comes in much cheaper allowing the user to pick and choose what software features they want. Click here to download firmware version 2.02.00 for the Zacuto Gratical. The SmallHD 500 series monitors also get an update. Firmware version 2.0 is a slightly more significant update adding quite a few key features, here’s a list from last week’s release: 3D Luts Downstream Cross Conversion Added (502 model only) RGB Parade SDI Metadata Display Brightness & Contrast Settings Profile Saving To SD Card. Image Capture can now capture the image with the active LUT applied. Anamorphic 1.5x Option Added Audio Meters Opacity Setting Added Bugs fixed HDMI compatibility improvements Zebra: IRE Range change from [-2 → 107] to [-7→109] Focus assist accuracy improved The LUTs downstream feature now means you can now provide a different image via the output of your monitor than the one you view as an operator. This is great for offering a client monitor a roughly graded image whilst you look at your custom LUT, log image and/or overlays. Custom LUTs now have the ability to be recorded also, which could be handy for very quick turn around workflows. Cross conversion was a feature lacking from the original release; it’s a huge selling point of the 502 monitor and will receive and output any combination of SDI and HDMI input. What’s more it will offer dual output. For example it can receive a HDMI from your camera and output both SDI and HDMI simultaneously. I used a SmallHD 502 on a shoot very recently with the Sidefinder attachment and was very impressed; the quick swipe via the joystick to access different pages is a fantastic feature. You can set one page that’s overlay rich to gain exposure and focus, then swipe across to a clean image just prior to record to monitor all the action. You could also add another with a LUT on top to quick switch between what’s being recorded and what the image will look like it post. One feature I did miss was brightness, contrast and colour adjustments on the monitor. It’s nice to see the former two addressed in firmware 2.0. Another key feature is the profile saving to SD card. This means you can save all your settings and pages and quickly load in another 500 series monitor. This is a great feature which many could take inspiration from. I’d love to see this implemented more in other camera specifically (it’s great on the Arri Amira) as it would save so much time with hired kit getting it customized to how you like it. One feature I do want to see in the next firmware update for the 500 series monitors is power via the USB port. This is a great on the old DP4 monitor as it provides a universal peripheral for powering accessories (like the Paralinx Arrow), keeping setups compact. Click here to download Firmware version 2.0 for the SmallHD 500 series.Read more
A couple of months ago SmallHD announced the 502, a new super lightweight 1080p 5″ monitor. Today they’ve introduced a HDMI only version, the 501. Check out our article on the 502 here, a compact and lightweight monitor, ideal for small mirrorless cameras and gimbal devices due to its 1lbs form factor. The 501 promises nearly all features of the 502; 1080p screen, LUT support, vast exposure and focus aids, plus compatibility with the new Sidefinder accessory (turns the compact monitor into a high resolution viewfinder). The difference? The 501 is HDMI only. The 502 packs a lot of punch in the peripheral department. SDI and HDMI in/out as well as cross converting either signal. The 501 is simply HDMI in/out only. Making it more affordable than its SDI abled bigger brother. This comes as no surprise, as SmallHD recently announced the discontinuation of the DP4, their previous entry level HDMI only monitor. Here’s the specification list for the SmallHD 501: Panel Type LCD Size Diagonal 5 Resolution 1920 x 1080 Pixel Density (PPI) 441 Aspect Ratio 16:9 Native Active Area 5.0 in Brightness 400 cd/m2 Contrast 1500:1 Color Gamut 85% NTSC (100% Rec 709) Color Depth 24 Bit (8bpc) Viewing Angle Full 179 Degrees Backlight Type LED Adjustable Backlight Yes Temperature Adaptive Color Yes Dual LP-E6 battery slots Pricing of the 501 is currently at $899, a $300 saving against the 502.Read more
We only send updates about our most relevant articles. No spam, guaranteed! And if you don't like our newsletter, you can unsubscribe with a single click. Read our full opt-out policy here.