by Sebastian Wöber | 19th January 2014
The PS Cam X35 is a camera few people are aware of, even though it was for a long time among the more affordable cameras to shoot up to 750fps (1500fps via paid upgrade). It has been around since 2011 when it was introduced at IBC and still there’s hardly any information available about it. Let’s change that. For the day of religious liberty I thought it is appropriate to publish this clip I shot on the PS Cam X35 last year and share the experience. I will not call this writeup a “review” because it was my first attempt at high speed shooting and there are several unlucky things that got in the way. I will mention these in the hopes that others might be better prepared. So what’s this camera about? Well I already mentioned that it was among the more affordable high speeders. That said at about $74,000 the price is still in the pro league and recently high speed has become a lot more affordable with the introduction of other new cameras like the Phantom Miro. The other thing you should know about this camera is that additionally to highspeed it can record sync sound in normal speed up to 60fps which makes this camera more versatile. In terms of slomo it can record 1-750fps @ 1920×1080 with a global shutter CMOS and does so by caching the frames. You hit record and when the buffer is full after a few seconds it will stop. Next thing you do is playback the shot at normal speed and record that signal via the 10-bit uncompressed (4:2:2) 1,5G HD-SDI outputs. For the recording purpose we had the Gemini 4:4:4 recorder, one of the single most annoying pieces of tech I’ve ever used. That had to go off my chest. I can not recommend the Gemini and will personally never touch one of these again. We need more light! This was a charity shoot with no money. I tried to spend as little as possible on lighting but apparently I miscalculated and we ended up with too little. This is one of the reasons why there’s just too much noise in all the footage which was a pity. If you plan on shooting with this camera make sure you bring sufficient light or otherwise you’ll pay for it later. Obviously highspeed needs light, but apparently a camera like this needs even more light as the sensor is very unforgiving and has noise patterns in the blacks and dark areas. It’s wise to not dial up the ISO’s like on a normal speed camera. And one should keep in mind that the signal from the X35 was not RAW in the configuration we shot. Another thing about lighting and the X35 or highspeed in general is dynamic range. Here you only get about 9-11 stops of range which is a whole different way of working than with the high dynamic range cameras we’ve gotten used to. Even though we used very soft lighting fixtures and the darks were already drowning the highlights still clipped easily. Another thing I noticed in terms of picture quality was the image density. It seems to me like there is either a native resolution lower than 1920×1080 or a kind of pixel smoothing going on. On the left you can see a 100% crop of an image with fine details. It seems like the details don’t get displayed correctly and result in something that looks like aliasing or something I’d call “pixel stepping”. You can also see these phenomena in P+S’ own demo videos which can be found here. The P+S knowledge base entry states that the native resolution of the sensor is full 1920×1080. Now the last thing you should know: Being a thorough guy I did a test shoot several days before the actual shoot. The camera produced a flat clip with the LOG90 gamma curve that I had chosen. The other alternative was PSlogC which I didn’t choose because it was too flat for my purpose. The result of the white surface I filmed had little noise. Had I tested on a black background (as the subjects on the actual shoot) and color corrected that beforehand with the right LUT I would have noticed that I need to expose much stronger in order to get rid of the pattern noise in darker areas. Lesson learned. I should mention that with the color correction LUT part I was very unlucky as I could not find a LUT for the camera. I contacted P+S Technik and asked them for the LUT for their camera. Unfortunately they only got back to me after the shoot was already over 4 days later. I called the day before the shoot, I called on the day of the shoot and I called on the day after the shoot which was when I could finally get someone to answer that e-mail I had sent days earlier. But it was already too late and the actual answer was that there is really no LUT for the camera, but they used gamma curves of other cameras. Here’s the official statement by P+S Technik: Due to the diversity of post-production software we decided during the X35 development not to create a new lookup table for the logarithmic conversion of the image data. Instead of a new table we implemented several common lookup tables. After some test we choose the Arri logC and the SI2k log90 curves (besides the regular Rec.709 and a linear curve). To convert the logarithmic information into linear data again you can use the Arri respectively SI2k LUT’s. I contacted the guys who make the SI2K, but they never replied either. Until this day I don’t have a LUT that will work with the camera’s LOG90. All in all the result is pleasing enough at 720p, and the client is happy. For the next highspeed shoot I will get the camera tested earlier on and most importantly in similar conditions. As for the X35 I’m a little disappointed with their support and the camera seems not very forgiving. If you treat it right though, and that might just be the case for other high speed cameras too, it seems like a realiable working tool that allowed a straight forward working process. As I mentioned earlier this is not a review and I could only observe, not judge the performance of the camera as it was very different than normal speed cameras and I did not have other high speed cameras for comparison. Thanks to our friends at Digirental in Vienna for their support. If you need cameragear in Vienna check them out. For more information on products by P+S Technik go to: www.pstechnik.de The religious liberty clip was an ultra low budget project. This is an unbranded version of the original which can be found here: link Video Credits: Production – Comfilms Director – Benjamin Hoffmann Production Manager – Samuel Hoffmann Unit Manager – Jeannette Kupper Camera Assistant – Gerhard Weiner Photography – Sebastian WöberRead more
We only send updates about our most relevant articles. No spam, guaranteed! And if you don't like our newsletter, you can unsubscribe with a single click. Read our full opt-out policy here.